L-bar sealer can automatically feed, transport, sealing, shrink once completed with high efficiency. L bar type cutter can easily seal the POF film without broken. Auto photo sensor detecting and auto cutting. It is high working efficiency and suits for the products of different height and width.
1. Equipped with PLC control system and safety protection alarm device; Continuous sealing, no need to replace. Simple operation and easy maintenance; 2. Electronic counter can automatically adjust the shrink film length; 3. Increased horizontal and vertical electric eyes provide switching options. Suitable for shrinking thin and small products; 4. The sealing knife is made of sticky and high temperature resistant alloy material, and the knife is coated with Teflon non-stick film film outside. Continuous sealing and cutting is possible to achieve perfect sealing and cutting. 5. Automatic execution of chip removal process. No mess left, keep the work space neat and tidy. 6. Suitable for food, gift, hardware, daily necessities, pharmaceutical, printing
Translated with www.DeepL.com/Translator (free version)
Preparation before using the automatic L-shaped shrinking machine
The automatic L-shaped shrinking machine is one of the l sealer shrink wrap machine with a higher degree of automation. The machine adopts automatic sealing and cutting without manual labor. It can be directly connected to the pipeline. The automatic L-shaped shrinking machine has been debugged before leaving the factory. Just pay attention to the following points before use: 1. Installation location: The installation location should be stable on the ground, and the power supply air source is easy to use. A place that can be directly connected to the assembly line. 2. Power supply: The machine has two parts: a sealing and cutting machine and a shrinking furnace. The sealing and cutting machine is 220V, and the shrinking furnace is 380V. 3. Air source: The cutting action of the automatic L-shaped sealing and cutting machine is completed by the air cylinder, so it needs to be connected to the air source pressure of 0.4~0.6MPA before use. 4. Read the manual: read the manual carefully and operate the machine according to the regulations.