1. Equipped with PLC control system and safety protecting and alarm devices; Constant sealing with no need of changing. Easy to operate and maintain;
2. Electronic counter can automatically adjust the length of shrink film;
Model | STF-4535L/M | STS-4525 | STS-5030LS |
Power | 2kw 220V | 10kw 380V | 16kw 380V |
Packaging size | W+H≤430mm;H≤110mm | L500*W400*H200mm | L1200*W450*H300mm |
Sealing/Tunnel size | L550*W450mm | L1000*W450*H250mm | L1500*W500*H300mm |
Packaging Speed | 1-25ppm | 20-40ppm | 20-60ppm |
Max current | 10A | 30A | 32A |
Machine Size | L1830*W850*H1550mm | L1300*W715*H1455mm | L2000*W1100*H1250mm |
Weight | 250kg | 185kg | 650kg |
L-bar sealer can automatically feed, transport, sealing, shrink once completed with high efficiency. L bar type cutter can easily seal the POF film without broken. Auto photo sensor detecting and auto cutting. It is high working efficiency and suits for the products of different height and width.
1. Equipped with PLC control system and safety protecting and alarm devices; Constant sealing with no need of changing. Easy to operate and maintain;
2. Electronic counter can automatically adjust the length of shrink film;
3. The added horizontal and vertical electric eyes provide options for switch over. It’s suitable for shrink thin and small products;
4. Sealing knife Using alloy material with anti-stick and high temperature resistance, knife external plating Teflon non-mucous membrane. It can keep continuously sealing and cutting to achieve perfect sealing.
5. Automatically perform the scraps discharge process. Leave no mess and keep your working space tidy and clean;
6. The machine is applicable to industries like food, gift, hardware, daily necessities, pharmacy, printing,
The automatic L-shaped shrinking machine is one of the shrink packaging machines with a higher degree of automation. The machine adopts automatic sealing and cutting without manual labor. It can be directly connected to the pipeline. The automatic L-shaped shrinking machine has been debugged before leaving the factory. Just pay attention to the following points before use:
1. Installation location: The installation location should be stable on the ground, and the power supply air source is easy to use. A place that can be directly connected to the assembly line.
2. Power supply: The machine has two parts: a sealing and cutting machine and a shrinking furnace. The sealing and cutting machine is 220V, and the shrinking furnace is 380V.
3. Air source: The cutting action of the automatic L-shaped sealing and cutting machine is completed by the air cylinder, so it needs to be connected to the air source pressure of 0.4~0.6MPA before use.
4. Read the manual: read the manual carefully and operate the machine according to the regulations.
contact me